MicroPDM Primary Power Distribution Module
Power Distribution Module with 7 outputs. Choose between high side - with 2.5 amp outputs or low-side that will sink (ground) loads up to 0.5 amp.
Power Distribution Module with 7 outputs. Choose between high side - with 2.5 amp outputs or low-side that will sink (ground) loads up to 0.5 amp.
Power Distribution Module with 7 outputs. Choose between high side - with 2.5 amp outputs or low-side that will sink (ground) loads up to 0.5 amp.
Features at a glance
7 outputs, expandable to 14.
Control 7 2.5A circuits with each MicroPDM. Add a secondary unit to double the number of outputs. Output options
4 - 12 buttons
The MicroPDM supports most Blink Marine PKP series panel with 4-12 buttons.
Flexible behavior
Need a momentary pushbutton for push-to-talk? Need a latching pushbutton for a cooling fan? The MicroPDM supports momentary, latching, ignition-on, mutually exclusive groups, plus a lot more.
Personalize with colors
7 solid colors + 8 flashing colors are available to individualize each button. Use a flashing button as an interactive warning light.
Motorsport behavior built-in
The MicroPDM has built-in behavior for common race car devices.
Specialized uni-taskers like cool suit pump controllers, flash-to-pass relays, rain light flashing modes, and defroster timers are no longer needed. Get rid of the complexity and simplify your next race car build.
Control over CAN
Ability to speak on the CAN bus? If so, you can configure the PDM, remote control buttons, and listen for button events. The sky’s the limit.
Perfect compliment to AIM and RaceCapture
Have an AIM Dash or RaceCapture device? Want to control it with keypad buttons or toggle outputs based on data? No problem.
Leave the laptop at the shop
Forget about buggy software, glitchy bluetooth or wifi, or that special USB cable. The MicroPDM is configured on the panel itself.
If you can set an alarm clock, you can configure the MicroPDM direct from the driver’s seat.